Icom IC-A24 Instruction Manual
Also see for IC-A6: Price listSpecification sheetInstruction manualInstruction manualInstruction manual
                                        | |
Contents
| 
113 BASIC OPERATION Setting weather alert functionAn NOAA broadcast station transmits a weather alert tone be-fore any important weather announcements. When theweather alert function is turned ON, the transceiver detectsthe alert, and sounds a beep tone until the transceiver is op-erated. The previously selected (used) weather channel ischecked any time during standby, or while scanning.• Push , then push [SQL•WX-ALERT] to turns the weatheralert function ON (Indicates “ ”)/OFF (Indicates“ ”). Accessing 121.5 MHzemergency frequencyThe IC-A24 and IC-A6 can quickly access to the 121.5 MHzemergency frequency. This function can be activated evenwhen the key lock function is in use.q Push [121.5] for 2 sec. to call the emergency frequency.w Push [CLR•DEL ] to exit from the emergency frequency. Lock functionThe lock function prevents accidental frequency changes andaccidental function activation.q Push , then push [7• ] to turn the lock function ON.• “ ” appears.w To turn the function OFF, repeat step q above.• “ ” disappears. Side tone functionWhen using an optional headset, the transceiver outputs yourtransmitted voice to the headset for monitoring. Connect theoptional headset with the transceiver when using this function(OPC-499 HEADSET ADAPTER and headset are required).(p. 34)D Setting the side tone levelq Push [PTT] to turn the transmit mode ON.w During transmit mode, rotate [DIAL] to adjust the monitor-ing level.• ‘ST--0’ is OFF and ‘ST--10’ is Max. level.NEVER operate the transceiver with a headset at high vol-ume levels for long period. A ringing in your ears mayoccur. If so, reduce the monitor level or discontinue use. Setting beep toneThe beep tone which sounds at the push of a switch can beset, if desired.q Push , then push [8•BEEP ] to enter the beep tonesetting mode.w Rotate [DIAL] to set the beep level.• ‘BEP-- 0’ is OFF and ‘BEP-- 9’ is Max. level.e Push [CLR•DEL ] to exit the beep tone set mode. BacklightingPush [LIGHT] to turn the display and keypad backlighting ONor OFF.IC-A24-Nocl.qxd 04.9.1 5:50 PM Page 12 |
Related manuals for Icom IC-A6
Icom IC-A24 Instruction Manual
Icom IC-A24 Instruction Manual
Icom IC-A24 Instruction Manual
Icom IC-A24 Instruction Manual
Icom IC-A24E Instruction Manual
Icom IC-A24E Instruction Manual
Icom IC-A24E Instruction Manual
Icom IC-A22 Instruction Manual
Icom IC-A22 Instruction Manual
Icom IC-A23 Instruction Manual
manualsdatabase
Your AI-powered manual search engine