278BATTERY PACKS8Regular chargingïq Attach the battery pack to the transceiver.w Be sure to turn the transceiver power OFF.e Connect the Wall charger or optional cable (CP-20) asshown below.r Charge the battery pack approximately 8 hours, depend-ing on the remaining power condition.DO NOT charge the BP-210N more than 12 hours. Other-wise, the BP-210N will be damaged.Optional battery case■When using a battery case attached to the transceiver,install 6 × AA (LR6) size Alkaline batteries, as illustratedbelow.q Remove the battery case from the transceiver.w Install 6 × AA (LR6) size Alkaline batteries.• Be sure to observe the correct polarity.CAUTION:• When installing batteries, make sure they are all thesame brand, type and capacity. Also, do not mix newand old batteries together.• Keep battery contacts clean. It’s a good idea to cleanbattery terminals once a week.To [DC 11V]IC-A24E/A6E with theattached battery packCP-20 (for 11 24 V)(optional)To the cigarettelighter socketTo AC outletThe shape maydiffer dependingon the version.Wall chargerTurn power OFFR WARNING!• NEVER modify the CP-20. A modifica-tion could cause a fire or electrocution.• NEVER cut or fray the CP-20’s powercable when disconnecting/connectingthe CP-20 from/to the cigarette lightersocket.