203 BIIS OPERATION Transmitting a statusDD GeneralThe status message can be selected with the programmedtext, and the message text is also displayed on the functiondisplay of the called station.Up to 24 status types (1 to 24) are available, and the statusmessages 22 and 24 have designated meanings.Status 22: Emergency*Status 24: GPS request*The status 22 can also be used as a normal status message bydisabling the designated meaning. However, the status 24 is fixed.The status call can be sent with both individual and groupcalls.DD Transmitting a statusq While in the standby condition, push [P1] (Digital), thenpush [Up] or [Down], or rotate [DIAL] to select the desiredstation/group code.w Push [P1] (Digital) again, then push [UP] or [DOWN] toselect the desired status message.Or, you can select the desired status message using[Status Up]/[Status Down] key directly.e Push [P0] (Call) or [PTT]* to transmit the status messageto the selected station/group.*PTT call can be made only when PTT call capability is permitted.• 2 beeps will sound and the transceiver returns to the standbycondition automatically when the transmission is successful.S T A T U S 0 1T X S t a t u s 0 1Status message is displayed.

panel description

I Function display

I Programmable function keys

I Channel selection

I Call procedure

D Transmitting notes

D TX code number edit

D DTMF transmission

user set mode

I Receiving a call

D Group call

I Transmitting a call

D Direct code entry

I Receiving a message

D Received message selection

I Transmitting a status

D General

D Programming an SDM memory

I Position data transmission

I Stun function

I Supplied Accessories

I Mounting the transceiver

I Optional UT-109 or UT-110 installation

I Antenna

Icom IC-F1710 Instruction Manual

i programmable function keys

mdc 1200 operation

i receiving a call

IC-F1710

explicit definitions

PANEL DESCRIPTION

n Function display

n Programmable function keys

n Turning power ON

n Call procedure

transmitting notes

basic operation

n Scrambler function

BIIS OPERATION

group call

n Transmitting a call

n Receiving a message

n Transmitting a status

transmitting an sdm

n Position data transmission

n Stun function

CONNECTION AND MAINTENANCE

n Supplied Accessories

n Mounting the transceiver

n Optional OPC-617 installation

n Antenna

IC-F1810

IC-F2710

IC-F2810