Icom IC-F2610 Service Manual
Also see for IC-F2610: Instruction manualService manualService manual
                                       | |
3 - 2£ Attach the ‘RMK-1 rear unit attachment’ to the trans-ceiver main unit using the supplied screws.¢ Remove 4 screws from the attachment to open thefront plate.∞ Connect an optional separation cable OPC-609 (1.9 m)to the inside of the front plate and tighten the cable lugusing the screw.§ Re-attach the front plate.• RMK-1 connection¡ Remove 3 allen-socket bolts from the front plate usingan allen-wrench (1/32 in).™ Separate the front unit from the transceiver main unit.¶ Remove 4 screws from the ‘RMK-1 front unit attach-ment’ to open the rear plate.• Connect the other end of the optional separation cableto the atachement and tighten the cable lug using thescrew.ª Re-attach the rear plate.º Attach the front unit and attachment with the 3removed allen-socket bolts.Front plateSupplied screwswith the RMK-1RMK-1 rear unitattachmentSeparationRMK-1 front unit attachmentSeparationcableRear plateDownloaded from www.Manualslib.com manuals search engine |
Related manuals for Icom IC-F2610
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine