Icom IC-F3032T Instruction Manual

Also see for IC-F3032S: Service manual addendum Instruction manual Instruction manual

Contents

62PANEL DESCRIPTION2SCAN ADD/DEL (TAG) KEY➥ Push to add a channel to, or delete it from the current scanlist.• When a channel is added to the current scan list, the displayshows “SCAN ON.” When a channel is deleted from the currentscan list, the display shows “SCAN OFF.” After showing “SCANON” or “SCAN OFF,” the display shows the current scan list text.➥ You can add a channel to, or delete it from the scan listafter selecting the list.1. Hold down for 1 second to display the current scan list,and then push [CH Up] or [CH Down] to select a desiredlist.2. Push this key to add a channel to, or delete it from theselected list.3. Hold down this key for 1 second to exit the scan listselection mode.➥ Push this key while a scan is paused on a channel, exceptfor primary or secondary channel, and then the channel isdeleted from the scan list.• Depending on the setting, the deleted channel is added to thescan list again after the scan is cancelled. (Nuisance Deletefunction)C.TONE CH ENT KEYPush to select the continuous tone channel using [CH Up]/[CH Down] to change the tone frequency/code setting. Theselected channel remains set as the continuous tone channeluntil another channel is designated as such.MR-CH 1/2/3/4 KEYSPush to select memory channels 1 to 4 in the operating zonedirectly.MONI KEYMute and release the CTCSS (DTCS) or 2-Tone squelchmute. Open any squelch/deactivate any mute while holdingdown this key.LOCK KEY➥ Hold down for 1 second to electronically lock all assignablekeys except the following:[Call] (incl. Call A and Call B), [Moni], [Emergency], [Sur-veillance], [Siren], [Lone Worker] and [OPT 1/2/3].➥ Hold down for 1 second again to turn the lock function OFF.HIGH/LOW KEYPush to select the transmit output power temporarily or per-manently, depending on the presetting.• Ask your dealer for the output power level for each selection.OPT MOMENTARY KEYSControls the output signal level of the optional ports in theoptional unit connector while holding down this key.OPT OUT KEYSPush to control the output signal level of the optional ports inthe optional unit connector.SCRAMBLER FUNCTIONPush to toggle the voice scrambler function ON and OFF.