Icom IC-F30GT Service Manual
Also see for IC-F30GS: Instruction manualService manualInstruction manualInstruction manualServise manual
                                      | |
3 - 1SECTION 3 DISASSEMBLY INSTRUCTIONS1 Removing the chassis panel2 Removing the shield plate3 Removing the MAIN unit4 Removing the FRONT unitq Remove 2 knobs A, and unscrew 1 nut B.w Unscrew 1 screw C (ICOM screw), and 2 screws D (2 ×4 mm, black) from the 9-pin connector.e Unscrew 2 screws E (2 × 8 mm, silver) from the chassis.r Take off the chassis in the direction of the arrow.q Unplug the flexible cable from J1 on the FRONT unit toseparate the chassis.w Take off the flexible cable in the direction of the arrow.e Unscrew 8 screws F (2 × 3 mm, black) to separate theshield plate.q Unsolder 2 points G.w Unscrew 2 nuts H.e Unscrew 6 screws I (2 × 4 mm, silver), and 2 screws J(2 × 4 mm, black) from the MAIN unit.r Take off the MAIN unit in the direction of the arrow.q Unplug the LCD flexible cable from J2 on the FRONT unitto separate the front panel.w Unscrew 6 screws K (2 × 3.5 mm, silver) from the FRONTunit.e Unsolder the leads of speaker.ABCDEChassisFront panel9-pin connectorShield plateMAIN unitChassisFlexible cableFFFFMAIN unitChassisNutHJIGIFront panelFront unitJ2J1LCD flexible cableKK |
Related manuals for Icom IC-F30GS
manualsdatabase
Your AI-powered manual search engine