82PANEL DESCRIPTIONMEMORY CH 1/2/3/4 KEYS “CH1” “CH2” “CH3” “CH4”Push to select the memory channels 1 to 4 drectly.MONI KEY “MON”➥ Push to mute and release the CTCSS (DTCS) or 2-tonesquelch mute. Open any squelch/deactvate any mutewhle pushng and holdng ths key. (LMR operaton only)➥ Actvates one of (or two of) the followng functons oneach channel ndependently: (PMR operaton only)• Push and hold to un-mute the channel (audo s emtted; ‘Aud-ble’ condton).• Push to mute the channel (sets to ‘Inaudble’ only).• Push after the communcaton s finshed to send a ‘reset code’.(5-tone/BIIS operaton only)NOTE: The un-mute condton (‘Audble’ condton) mayautomatcally return to the mute condton (‘Inaudble‘condton) after a specfied perod.LIGHT KEY “LIGT”Push to turn the transcever’s backlght ON temporarly onlywhen the backlght functon s turned OFF n user set mode.LOCK KEY “LOCK”➥ Push and hold for 1 sec. to electroncally lock all program-mable keys except the followng:[PTT], [Call] (ncl. Call A and Call B), [Mon(Aud)], [Lght],[Emergency], [Survellance] and [Lone Worker].➥ Push and hold for 1 sec. agan to turn the lock functonOFF.LONE WORKER KEY “LONE”Push to turn the Lone Worker functon ON or OFF.• If the Lone Worker functon s actvated, the Emergency functon sautomatcally turned ON after the specfied tme perod has passedwth no operaton s performed.HIGH/LOW KEY “H/L”Push to select the transmt output power temporarly or per-manently, dependng on the pre-settng.• Ask your dealer for the output power level for each selecton.C.TONE CH ENT KEY “TSEL”Push to enter the contnuous tone channel selecton mode.Then select the desred tone frequency/code settng wth[CH Up] or [CH Down]. After the selecton, push ths keyagan to set.The selected channel remans set as the contnuous tonechannel untl another channel s desgnated as such.12345678910111213141516