Icom IC-F3162T Instruction Manual

Also see for IC-F3162S: Servise manual Insrtuction manual Instruction manual

Icom IC-F3162T Instruction Manual Manual pdf 14 page image

■ Turning power ONPror to usng the transcever for the first tme, the batterypack must be fully charged for optmum lfe and operaton.(p. 18)q Rotate [VOL] to turn the power ON.w If the transcever s programmed for a start up password,nput the dgt codes as drected by your dealer.• 10-keypad can be used for password nput dependng onverson.• The keys n the table below can be used for password nput.• The transcever detects numbers n the same block as dentcal.Therefore “01234” and “56789” are the same.KEYNUMBER 0549382716(Side1)P0 P1 P2 P3e When the “PASSWORD” ndcaton does not clear afternputtng 6 dgts, the nput code number may be ncorrect.Turn the power off and start over n ths case.D Battery type selectionThe battery type must be selected accordng to the attachngbattery type when tunng the transcever ON.➥ Whle pushng and holdng [Emer] and [PTT], rotate [VOL]to toggle the attachng battery type.• After the dsplay appears, release [Emer] and [PTT].• “ DRY BATT” s dsplayed for about 3 sec. then “Lo” (low powerndcator) appears when the battery case operaton s selected.• “LI-ION” s dsplayed for about 3 sec. when the Lthum-on bat-tery operaton s selected.• Ths operaton may not be avalable dependng on the pre-settng.Ask your dealer for detals.113 BASIC OPERATION