Icom IC-F3200DEX Operating Instructions Manual

Also see for IC-F3200DEX: Instructions Operating instructions

Contents

4 dPMR™ OPERATION4-3Receiving an Individual callD When an Individual call is received:q• The transceiver will automatically transmit a return sig-nal.• The status indicator blinks orange.• Beeps sound and the mute is released.Hold down [PTT], then speak into the microphone.wRelease [PTT] to receive.eAfter the communication is finished, push [Clear] torsend a ‘Disconnect’ signal to terminate the connec-tion.NOTE: The status indicator and Beeps may differ,depending on the presetting.Receiving a Group callDWhen a Group call is received:q• The status indicator blinks orange.• Beeps sound and the mute is released.Hold down [PTT], then speak into the microphone.wNOTE: Only one station is allowed to speak at thesame time.Release [PTT] to receive.eAfter the communication is finished, push [Clear] torsend a ‘Disconnect’ signal to terminate the connec-tion.NOTE: The status indicator or Beeps may differ, de-pending on the presetting.Receiving a callReceiving a Stun, Kill or ReviveDIf an individual Stun or Kill call is received, the trans-ceiver will automatically transmit an acknowledgement,and then you cannot receive* or transmit.* Reception may be available, depending on the preset-ting of the received stun command.When a Stun command is received:➥• The transceiver cannot be operated until the individualrevive call is received or until data cloning is performed.• Even if [ROTARY SELECTOR] is changed, the trans-ceiver will stay on the same channel the Stun commandreceived on.When a Kill command is received:➥• The status indicator alternately blinks red and green.• The transceiver cannot be operated until data cloning isperformed.NOTE: Depending on the presetting, the transceivermay ignore the Stun, Revive and Kill commands, thatare from a non-specified station.Receiving a Status Polling callDIf a Status Polling call is received, the transceiver willautomatically transmit its current status.*Receiving an Ambience Listening callDIf an Individual call with an Ambience Listening com-mand is received from a specified station, the transceiv-er will automatically transmit its microphone audio.**Depending on the presetting.NOTE: If the transceiver receives an Ambience Lis-tening command from a station other than the speci-fied one, the call will be ignored, and the transceiverwill not transmit its microphone audio.Receiving an Emergency callD When an Emergency call is received:q• The transceiver will automatically transmit a return signal.• The status indicator blinks orange.• Beeps sound and the mute is released.Push [Clear] to return to the standby mode.wTalk back functionDThe Talk Back function allows you to select the samecall mode (Analog or Digital) as the received call.NOTE: When this function is not activated, the trans-ceiver always transmits analog signals on “Mixed-Analog” channels, and digital signals on “Mixed-Dig-ital” channels.• On these channels, the transceiver can receive bothanalog and digital signals, regardless of the Talk Backfunction.