Icom IC-F3260 Series Instruction Manual

Also see for IC-F3260 Series: Other

Icom IC-F3260 Series Instruction Manual Manual pdf 11 page image

62PANEL DESCRIPTION12345678910111213141516y BELL ICONAppears or blinks when a matched signal is received, de-pending on the presetting.u CALL CODE MEMORY ICONAppears when the call code memory is selected.i BATTERY ICONAppears or blinks when the battery power decreases to aspecified level.IndicationFull Mid ChargingrequiredExhaustedBatteryBattery levelblinks when the battery is exhausted.blinks when the battery is over charged.o ALPHANUMERIC DISPLAY➥ Displays the operating channel number, channel name,Set mode contents, DTMF code, and so on.➥ The display mode can be set to one line or two lines.Ask your dealer for details.• In this instruction manual, the LCD illustration is describedusing the two-line display mode.!0 KEY ICONSIndicates the programmed function of the front panel keys([P0], [P1], [P2] and [P3]).Programmable function keys■The following functions can be assigned to the [EMR],[Side1], [Side2], [Side3], [P0], [P1], [P2] and [P3] program-mable function keys.Consult your Icom dealer or system operator for details con-cerning your transceivers programming.CH UP AND DOWN KEYS “UP” “DOWN”➥ Push to select an operating channel. When [Rotary selec-tor] selects “operating channel,” this key is disabled.➥ Push to select a transmit code channel after pushing [TXCode CH Select].➥ Push to select a DTMF channel after pushing [DTMF Au-todial].➥ Push to select a scan group after holding down [Scan].➥ Push to select the desired application type, individual/talk-group ID, TX status message and SDM (Short Data Mes-sage) after pushing [Digital Button].