Icom IC-F3262DT Operating Manual

Also see for IC-F3262DS: Instruction manual Instruction manual

Contents

Icom IC-F3262DT Operating Manual Manual pdf 10 page image

72 BIIS 1200 OPERATION■ Transmitting a callD General• Editing an IDIf the transceiver has a key assigned to the TX Code Enterfunction, you can edit an ID within the allowable digits.Pushq [TX Code Enter] to enter the ID edit mode.• The digit to be edited blinks.w Push [TX Code Enter] to select a desired digit to be ed-ited.e Push [CH UP] or [CH DOWN] to select a desired num-ber.Pushr [TX Code Enter] to set. The digit to the right willautomatically blink.Repeat stept e and r to input all allowable digits.After editing, pushy [TX Code Enter] to store the setting.• The transceiver returns to the standby mode.NOTE: To overwrite the original ID, set the ‘Update’ itemto “Enable” using the CS-F3160/F5060 (dPMR) cloningsoftware . Otherwise, changing the channel or turningOFF the transceiver discards the new ID, and returns theoriginal one. Ask your dealer for details.D Transmitting an Individual or Group callNOTE: If you want to make a call to the preprogrammedID, skip step q and w then directly go to step e.Pushq [BIIS Button] to enter the call code memory mode.• The preprogrammed ID is displayed.• “ ” appears.w Push [CH Up] or [CH Down] to select a desired IndividualID or Group ID.Pushe [Call] to make a call.• “WAIT” appears while transmitting.• “CONNECT” is displayed when an acknowledgement is received.NOTE: If no acknowledgement is received, the trans-ceiver automatically repeats the call three times (de-fault). However, when no acknowledgement is receivedafter each of the calls, an error beep sounds and“FAILED” is displayed. In that case, the transceiver au-tomatically returns to the stand-by mode.r After “CONNECT” is displayed, hold down [PTT] andspeak into the microphone at your normal voice level. Re-lease [PTT] to receive.t After the communication is finished, push [Moni (Audi)] tosend a ‘Clear down’ signal to terminate the connection.BIIS CALL TXCE MON1234Appears