Icom IC-F3262DT Operating Manual

Also see for IC-F3262DS: Instruction manual Instruction manual

Contents

Icom IC-F3262DT Operating Manual Manual pdf 27 page image

24345678910111213141516123dPMR OPERATION24■ Transmitting a commandThe following Individual calls allow you to send special com-mands. These calls will function if you are designated as aspecific station. Ask your dealer for details.D Transmitting an Ambience Listening CallAn Ambience Listening call allows you to send a commandthat will require the target station to transmit its microphoneaudio.Pushq [dPMR Button] to enter the ID selection mode.• The preprogrammed ID is displayed.Pushw [CH Up] or [CH Down] to select a desired IndividualID.Pushe [dPMR Button] again to enter the application selec-tion mode.• “STATUS” is displayed.Pushr [CH Up] or [CH Down] to select “LISTENING.”t Push [Call] to transmit an Ambience Listening call to theselected station.• “WAIT” is displayed while transmitting.• “OK” is displayed when an acknowledgement is received, thenthe called station’s microphone audio can be heard for the pre-programmed time period.• “FAILED” is displayed when no acknowledgment is received.After a specified time period, the transceiver will return toythe stand-by mode.D Transmitting a Stun CallA Stun call allows you to send a command that will stun thetarget station.Pushq [dPMR Button] to enter the ID selection mode.• The preprogrammed ID is displayed.Pushw [CH Up] or [CH Down] to select a desired IndividualID.e Push [dPMR Button] again to enter the application selec-tion mode.• “STATUS” is displayed.Pushr [CH Up] or [CH Down] to select “STUN.”Pusht [Call] to transmit a Stun call to the selected station.• “WAIT” is displayed while transmitting.• “OK” is displayed when an acknowledgement is received.• “FAILED” is displayed when no acknowledgment is received.y After a specified time period, the transceiver will return tothe stand-by mode.