Icom IC-F33GT Instruction Manual

Also see for IC-F33GS: Instruction manual Instruction manual Service manual Service manual Service manual

Icom IC-F33GT Instruction Manual Manual pdf 21 page image

174BIIS OPERATIOND Group callq When a group call is received;• Beeps sound.• “ ” appears and the mute is released.• The programmed text message (e.g.“ ”) and the callingstation ID (or text) is displayed alternately, depending on thesetting.• “ ” appears or blinks depending on the setting.w Push and hold [PTT], then speak into the microphone ata normal voice level.NOTE: Only one station is permitted to speak.• “ ” appears.e Release [PTT] to return to receive.• “ ” appears while receiving a signal.r To finish the conversation, push [MONITOR] (Moni(Audi))to send the ‘Clear down’ signal.• Either station can send a ‘Clear down’ signal.• “ ” is displayed for 2 sec. (approx.)• “ ” disappears and the transceiver returns to the standby con-dition.D Displaying the received call record— Queue indicationThe transceiver memorizes the calling station IDs for record.Up to 3 calls can be memorized, and the oldest call record iserased when a 4th call is received. However, once the trans-ceiver is powered OFF, the all records are cleared.q Push [P1] (Digital) for 1 sec.• Displays following indication.When a record is availableWhen no record is availablew Push [UP] or [DOWN] to select the desired call.e Push [P1] (Digital) for 1 sec. again to return to the stand-by condition.• When no operation is performed for 30 sec., the transceiverreturns to the standby condition automatically.Appears or blinksAppears