Icom IC-F34GT Instruction Manual

Also see for IC-F34GS: Instruction manual Service manual Service manual Service manual

143 BASIC OPERATIOND TX code number edit(PMR or BIIS PMR operation only)If the transceiver has [TX Code CH Select] or [TX CodeEnter] assigned to it, TX code contents can be edited withinthe allowable digits.TO EDIT A TX CODE VIA [TX CODE CH SELECT] KEY:q Push [TX Code CH Select] to enter the TX code channelselection mode.• Select the desired channel using [UP] or [DOWN] if necessary.w Push [TX Code CH Select] for 1 sec. to enter the TX codeedit mode.e Push [TX Code CH Select] to select the desired digit tobe edited.r Set the desired digit using [UP], [DOWN], [TX Code CHUp], [TX Code CH Down] or 10-keypad.**Depending on version.t Push [TX Code CH Select] to set the digit. The editabledigit will move to the right automatically.• When the 10-keypad is used to set, the editable digit will moveto the right automatically without pushing [TX Code CH Select].y Repeat r and t to input all allowable digits.u Push [Call] or [PTT] to transmit the edited TX code.TO EDIT A TX CODE VIA [TX CODE ENTER] KEY:q Select the desired TX code channel via [TX Code CH Up]or [TX Code CH Down].w Push [TX Code Enter] to enter the TX code edit mode.e Push [TX Code Enter] to select the desired digit to beedited.r Set the desired digit using [UP], [DOWN], [TX Code CHUp] or [TX Code CH Down] or 10-keypad*.*Depending on version.t Push [TX Code Enter] to set the digit. The editable digitwill move to the right automatically.• When the 10-keypad is used to set, the editable digit will moveto the right automatically without pushing [TX Code CH Select].y Repeat r and t to input all allowable digits.u Push [Call] or [PTT] to transmit the edited TX code.