Icom IC-F4200DEX Instructions Manual

Also see for IC-F3200DEX: Operating instructions Operating instructions

284dPMR OPERATION1234567891011121314151617181920Receiving a Group callDWhen a Group call is received:q• The LED indicator blinks orange.• Beeps sound and the mute is released.Hold down [PTT], then speak into the microphone.wNOTE: Only one station is allowed to speak at the sametime.Release [PTT] to receive.eAfter the communication is finished, push [Clear] to send a ‘Dis-rconnect’ signal to terminate the connection.NOTE: The LED indicator or Beeps may differ, depending on thepresetting. Ask your dealer for details.Receiving a Stun, Kill or ReviveDIf an individual Stun or Kill call is received, the transceiver will au-tomatically transmit an acknowledgement, and then you cannot re-ceive* or transmit.* Reception may be available, depending on the presetting of the re-ceived stun command.When a Stun command is received:➥• The transceiver cannot be operated until the individual revive call isreceived or until data cloning is performed.• Even if [ROTARY SELECTOR] is changed, the transceiver will stayon the same channel the Stun command received on.When a Kill command is received:➥• The LED indicator alternately blinks red and green.• The transceiver cannot be operated until data cloning is performed.Ask your dealer for details.NOTE: Depending on the presetting, the transceiver may ignorethe Stun, Revive and Kill commands, that are from a non-speci-fied station.