Icom IC-F44GS Instruction Manual
Also see for IC-F34GS: Instruction manualService manualService manualService manual
                                               | |
Contents
|
113BASIC OPERATION Turning power ONq Rotate [VOL] to turn the power ON.w If the transceiver is programmed for a start up password,input the digit codes as directed by your dealer.• 10-keypad can be used for password input depending on ver-sion:• The keys in the table below can be used for password input:• The transceiver detects numbers in the same block as identical.Therefore “01234” and “56789” are the same.e When the “PASSWORD” indication does not clear afterinputting 4 digits, the input code number may be incorrect.Turn the power off and start over in this case. Channel selectionSeveral types of channel selections are available. Methodsmay differ according to your system set up.NON-BANK TYPE:Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]* toselect the desired operating channel, in sequence; or, pushone of [MR-CH 1] to [MR-CH 4] keys to select a channeldirectly.• Up to 16 pre-programmed channels can be selected via [ROTARYSELECTOR].*BANK TYPE:Push [BANK], then push [UP] or [DOWN] or rotate [ROTARYSELECTOR]* to select the desired bank.AUTOMATIC SCAN TYPE:Channel setting is not necessary for this type. When turningpower ON, the transceiver automatically starts scanning.Scanning stops when receiving a call.*Depending on the pre-setting.KEYNUMBER 0549382716DOWN |
Related manuals for Icom IC-F34GS
Icom IC-F4GS Instruction Manual
Icom IC-F4SR Instruction Manual
Icom IC-F420 Instruction Manual
Icom IC-F3GS Instruction Manual
Icom IC-F3 Instruction Manual
Icom IC-F43GT Instruction Manual
Icom IC-F43DT Instruction Manual
Icom IC-F43TR Instruction Manual
Icom IC-F30GS Instruction Manual
Icom IC-F51 Instruction Manual
manualsdatabase
Your AI-powered manual search engine