Icom IC-F5062D Instruction Manual

Also see for IC-F5062D: Instruction manual Instruction manual Operating guide Instructions

Contents

Icom IC-F5062D Instruction Manual Manual pdf 16 page image

112 BASIC OPERATIOND TX code edit (5-tone operaton only)If the transcever has a key assgned to TX Code CH Selector TX Code Enter, TX code contents can be edted wthn theallowable dgts.USING [TX CODE CH SELECT]:q Push [TX Code CH Select] to enter the TX code channelselecton mode.• Select the desred channel before enterng the TX code chan-nel selecton mode, f necessary.w Hold down [TX Code CH Select] for 1 second to enter theTX code edt mode.• The dgt to be edted blnks.e Push [TX Code CH Select] to select the desred dgt tobe edted.r Push [CH Up] or [CH Down] to set the desred dgt.t Push [TX Code CH Select] to set. The dgt to the rght wllautomatcally blnk.y Repeat steps r and t to edt all allowable dgts.u After edtng, push [TX Code CH Select] to set.• Return to the stand-by mode.i Push [Call] to transmt.USING [TX CODE ENTER]:q Push [TX Code Enter] to enter the TX code edt mode.• The dgt to be edted blnks.w Push [TX Code Enter] to select the desred dgt to be ed-ted.e Push [CH Up] or [CH Down] to select the desred dgt.r Push [TX Code Enter] to set. The dgt to the rght wll au-tomatcally blnk.t Repeat steps e and r to nput all allowable dgts.y After edtng, push [TX Code Enter] to set.• Return to the stand-by mode.u Push [Call] to transmt.D DTMF transmissionIf the transcever has a key assgned to DTMF Autodal, theautomatc DTMF transmsson functon s avalable. Up to 8DTMF channels are selectable.q Push [DTMF Autodal]— a DTMF channel appears.w Push [CH Up] or [CH Down] to select the desred DTMFchannel.e Push [DTMF Autodal] to transmt the DTMF code.