123BIIS OPERATIONDD Group callq When a group call is received;• Beeps sound.• “ ” appears and the mute is released.• The programmed text message (e.g. “ ”)and the calling station ID (or text) is displayed alternately.• “ ” appears or blinks depending on the setting.wPush and hold [PTT] (microphone), then speak into the mi-crophone at a normal voice level.NOTE: Only one station is permitted.• “ ” appears during transmit.e Release [PTT] to return to receive.• “ ” appears while receiving a signal.rTo finish the conversation, push [MONI (P4)] to send the“Clear down” signal.• Either station can send.• “ ” is displayed for 2 sec. (approx.).• “ ” disappears and the transceiver return to standby condition.DD Displaying the received call record— Queue indicationThe transceiver memorizes the calling station IDs for record.Up to 3 calls can be memorized, and the oldest call record iserased when a 4th call is received. However, once the trans-ceiver is powered OFF, all records are cleared.q Push [DIGITAL (P1)] for 1 sec.• Displays following indication.w Push [ ]/[ ] to select the desired call.ePush [DIGITAL (P1)] for 1 sec. again to return to standbycondition.• When no operation is performed for 30 sec., the transceiver re-turns to standby condition automatically.• When a record is available• When no record is availableAppears Appears or blinks