133 IDAS OPERATION■ Transmitting a call (continued)D Transmitting a MessageThe transceiver has the ability to send a preprogrammedmessage.There are 10 messages that can be sent.q Push [Digital Button] to enter the application selectionmode.• “VOICE” appears.• To change to the desired call type, hold down [Digital Button] for1 second while in standby. After changing, the transceiver auto-matically enters the application selection mode.w Push [CH Up] or [CH Down] to select “MSG.”e Push [Digital Button] again to enter the message selectionmode.• The preprogrammed message is displayed.r Push [CH Up] or [CH Down] to select the desired message.Preprogrammed message is displayed.t Push [Digital Button] again to enter the Individual or Talk-group ID selection mode.• The preprogrammed ID name is displayed.• When an ID name is not programmed, the ID code is displayed.• The primarily ID can be preset to display first.y Push [CH Up] or [CH Down] to select the desired ID name(or ID code).Individual or Talkgroup ID name is displayed.u Push [PTT] to transmit the message.• “MSG TX” is displayed.i Release [PTT].• “MSG OK” is displayed after receiving an acknowledgementfrom a base station.• “MSG FAIL” is displayed if there is no acknowledgment from thebase station.o After a specified time period has passed, the transceiverwill return to standby.