Icom IC-F51V Instruction Manual

Also see for IC-F51V: Service manual Instruction manual Instruction manual

183 BASIC OPERATIOND TX code channel selectionIf the transceiver has [TX Code CH Select] assigned to it, the in-dication can be toggled between the operating channel number(or name) and TX code channel number (or name). When theTX code channel number (or name) is displayed, [CH Up] or [CHDown] selects the TX code channel.USING [TX CODE CH SELECT] KEY:q Push [TX Code CH Select]— a TX code channel number (orname) appears.w Push [CH Up] or [CH Down] to select the desired TX codechannel.e After selecting, push [TX Code CH Select] to set.• Return to the stand-by mode.r Push [Call] to transmit the selected TX code.USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:If the transceiver has a [TX Code CH Up] or [TX Code CH Down]key assignment, the programmed TX code channel can be se-lected directly when pushed.D TX code number editIf the transceiver has [TX Code CH Select] or [TX Code Enter] as-signed to it, TX code contents can be edited within the allowabledigits.USING [TX CODE CH SELECT] KEY:q Push [TX Code CH Select] to enter the TX code channel selec-tion mode.• Select the desired operating channel before entering the TX codechannel selection mode if necessary.w Push [TX Code CH Select] for 1 sec. to enter the TX code editmode.• The digit to be edited blinks.