Icom IC-F51V Instruction Manual

Also see for IC-F51V: Service manual Instruction manual Instruction manual

233BASIC OPERATION1234567891011121314151617181920e Release [PTT] to receive.• The RX voice message is recorded.r Push [Playback/Rec] again to stop recording.• “ ” stops blinking.• The recording operation automatically stops after the following: therecording memory is full, pushing any key but [PTT], or transmit-ting a single tone.Playing back:The recorded voice messages are played back with [Playback] or[Playback/Rec].• “ ” appears on the function display when the unplayed message isin the recording memory.➥ Push [Playback] or [Playback/Rec] to playback the recordedmessage in sequence starting with the latest one.• Push [CH Up] or [CH Down] to select the desired message.• A short beep is emitted after playing back each message.• A long beep is emitted after playing back all messages.• During playback mode, “ ” appears when the unplayed messageis played back, or “ ” disappears when the played message isplayed back.• “ ” disappears after playing back the unplayed message for thespecified time period.• If you push [PTT] while playing back the message, the transceiverstops playing back, and then starts to transmit.Deleting the message:➥ While playing back the message, push and hold [Playback] or[Playback/Rec] for 1 sec. to delete the playing back message.➥ While pushing and holding [P0] and [CH Up], turn power ON todelete all messages in the recording memory.