Icom IC-F6022 Instruction Manual

Also see for IC-F5022: Service manual Instruction manual

Contents

Icom IC-F6022 Instruction Manual Manual pdf 14 page image

102 BASIC OPERATIOND TX code number edit (PMR operaton only)If the transcever has [TX Code CH Select] or [TX CodeEnter] assgned to t, TX code contents can be edted wthnthe allowable dgts.USING [TX CODE CH SELECT] KEY:q Push [TX Code CH Select] to enter the TX code channelselecton mode.• Select the desred operatng channel before enterng the TXcode channel selecton mode f necessary.w Push [TX Code CH Select] for 1 sec. to enter the TX codeedt mode.• The dgt to be edted blnks.e Push [TX Code CH Select] to select the desred dgt tobe edted.r Push [CH Up] or [CH Down] to select the desred dgt.t Push [TX Code CH Select] to set. The dgt to the rght wllblnk automatcally.y Repeat r and t to edt all allowable dgts.u After edtng, push [TX Code CH Select] to set.• Return to the stand-by mode.i Push [Call] to transmt.USING [TX CODE ENTER] KEY:q Push [TX Code Enter] to enter the TX code edt mode.• The dgt to be edted blnks.w Push [TX Code Enter] to select the desred dgt to be ed-ted.e Push [CH Up] or [CH Down] to select the desred dgt.r Push [TX Code Enter] to set. The dgt to the rght wllblnk automatcally.t Repeat e and r to edt all allowable dgts.y After edtng, push [TX Code Enter] to set.• Return to the stand-by mode.u Push [Call] to transmt.D DTMF transmissionIf the transcever has [DTMF Autodal] assgned to t, theautomatc DTMF transmsson functon s avalable. Up to 8DTMF channels are avalable.q Push [DTMF Autodal]— a DTMF channel appears.w Push [CH Up] or [CH Down] to select the desred DTMFchannel.e Push [DTMF Autodal] to transmt the DTMF code.