Icom IC-F6022 Instruction Manual

Also see for IC-F5022: Service manual Instruction manual

Contents

Icom IC-F6022 Instruction Manual Manual pdf 7 page image

31PANEL DESCRIPTION1.234567891.01.1.1.21.31.41.51.6■ .rogrammable function keysThe followng functons can be assgned to [U.], [DOWN],[.0], [.1.], [.2] and [.3] programmable functon keys.Consult your Icom dealer or system operator for detals con-cernng your transcevers programmng.If the programmable functon names are bracketed n the fol-lowng explanatons, the specfic key s used to actvate thefuncton depends on the programmng.CH UP AND DOWN KEYS➥ Push to select an operatng channel.➥ Push to select a transmt code channel after pushng [TXCode CH Select].➥ Push to select a DTMF channel after pushng [DTMF Au-todal].➥ Push to select a scan group after pushng and holdng[Scan A Start/Stop]/[Scan B Start/Stop] for 1 sec.ZONE KEYPush ths key, then select the desred zone usng [CH Up]/[CH Down].What is “zone”?— Selected channels are assgned to azone accordng to how they are to be used n a group.For example, ‘Staff A’ and ‘Staff B’ are assgned nto a“Busness” zone, and ‘John’ and ‘Cndy’ are assgned ntoa “Prvate” zone.SCAN A START/STOP KEY➥ Push to start and cancel scannng operaton.• When Power ON Scan functon s actvated, push to pause thescannng operaton. And the paused scan resumes after thespecfied tme perod has passed.➥ Push and hold ths key for 1 sec. to ndcate the scan lst,then push [CH Up] or [CH Down] to select the desred lst.SCAN B START/STOP KEY➥ Push to start and cancel scannng operaton.The scan restarts after the specfed tme perod haspassed when the scan (started wth ths key) s cancelledby except for ths key operaton.➥ Push and hold ths key for 1 sec. to ndcate the scan lst,then push [CH Up] or [CH Down] to select the desred lst.SCAN ADD/DEL (TAG) KEY➥ Push to add/delete the selected channel to/from the scanlst.1. Push to ndcate the scan group, then push [CH Up] or[CH Down] to select the desred lst.2. Push to add or delete the channel to/from the selected scan lst.3. Push and hold for 1 sec. to ext the scan lst selecton mode.➥ Push ths key whle scan s paused (a sgnal s detected)on a channel (except for prorty channel), the channel scleared from the scan lst.Dependng on the settng, the cleared channel s addedto the scan lst agan after the scan s cancelled.