Icom IC-F610 Instruction Manual

Also see for IC-F610: Instruction manual Instruction manual Service manual Instruction manual Service manual

Contents

Icom IC-F610 Instruction Manual Manual pdf 11 page image

OPERATIONTurning power ONPush [KI ] to turn the power ON.• A power-up alert tone sounds for about 1 sec. and an openingmessage may appear.If the transceiver is programmed for a start up passcode,input digit codes as directed by your System operator.• The keys in the diagram below can be used for password input:• The transceiver detects numbers in the same block as identical.Therefore “01234” and “56789” are the same.When the “PASSWORD” indication does not clear afterinputting 4 digits, the input code number may be incorrect.Turn power off and start over in this case. Channel selectionSeveral types are available, and the channel selectionmethod may differ according to your system set up.NON-BANK TYPE:Push the [CH Up]/[CH Down] keys to select the desired oper-ating channel, in sequence; or,push one of the [CH 1] to [CH 4] keys to select these channelsdirectly.BANK-TYPE:Push [BANK] to select the desired bank number.AUTOMATIC SCAN TYPE:Channel setting is not necessary for this type. When turningthe power ON, the transceiver automatically starts scanning.Scanning stops when receiving a call or when taking themicrophone off hook.KEY [P0] [P1] [P2] [P3] [P4]NUMBER 0 1 2 3 45 6 7 8 9.qxd 01.11.28 11:37 AM Page j (1,1)