Icom IC-F7010 Series Operating Manual

Contents

Icom IC-F7010 Series Operating Manual Manual pdf 83 page image

7 APCO P25 MODE OPERATION7-10Receiving a callD Receiving an Individual call1. When an Individual call is received:• Mute is released.• The calling station name (or ID) is displayed whilereceiving the signal.*2. Hold down [PTT] to speak.3. Release [PTT] to receive.D Receiving a Group call1. When a Group call is received:• Mute is released.• The Group name and the calling station name (or ID)are displayed while receiving the signal.* When an All Call is received, “All Call” is displayed. Inthat case, you cannot reply to it.2. Hold down [PTT] to speak.3. Release [PTT] to receive.D Receiving a Status message1. When a Status message is received:• Beeps sound.• The Status message and the calling station name (orID) are displayed.*• “ID) are displayed.*” blinks.• “ ” may be displayed or blink.*• Portable type transceivers may vibrate.*2. Push [Back] to stop the display indication.D Receiving a Short message1. When a Short message is received:• Beeps sound.• The Short message and the calling station or Groupname (or ID) are displayed.• “name (or ID) are displayed.” blinks.• “ ” may be displayed or blink.*• Portable type transceivers may vibrate.*2. Push [Back] to stop the display indication.D Receiving a Call Alert call1. When a Call Alert call is received:• Beeps sound.• “Call Alert” and the calling station name (or ID) aredisplayed.*• “ ” may be displayed or blink.*• Portable type transceivers may vibrate. * The transceiver automatically transmit anacknowledgment.2. Push [Back] to stop the display indication.D Receiving a Radio Check callWhen a Radio check call is received, the transceiverautomatically transmits an acknowledgment call.D Receiving a Remote Monitor callWhen a Remote monitor call is received, themicrophone audio is automatically transmitted for thepreset period of time.*Depending on the presetting.D Receiving a Status Query callWhen a Status Query call is received, the transceiverautomatically transmits the last transmitted Statusmessage.