Icom IC-F8101 Service Manual
Also see for IC-F8100: Instruction manualInstruction manualInstruction manualService manualManual
                                                                                 | |
*; Enter the Confi g Menu as shown below.1) Push [ ] to return to the Main Menu.2) Select “Setmode” and push [ ] to enter, and then select “Config” using []/[].3) Select “RF Power,” and then set the TX power.4) Return to the Factory Menu to continue the adjustment.5-3 TRANSMIT ADJUSTMENTS (Continued)5-9• ADJUSTMENT POINT ON THE MAIN-A UNIT• CONNECTION FOR THE TX IF ADJUSTMENT[MIC]AudiogeneratorFrequency: 1 kHzLevel: 1 mVrmsPTTAC millvoltmeterADJUSTMENT TRANSCEIVER’SCONDITION OPERATION ADJUSTMENTITEM VALUETX IF 1 • Channel: 23• Mode: USB• Receiving• Test equipment1) Connect the test equipmentto the antenna connector and[MIC].2) Set the test equipment’s audiogenerator as:Frequency: 1 kHzLevel: 1 mV(Config Menu)* "RF Power""HIGH"2 • Transmitting(MAIN-A UNIT) L1444MaximumTX powerTX IF GAIN 1 • Channel: 24• Receiving – (MAIN-A UNIT) R1535 CenterpositionTX IF ADJUSTMENT POINT(L1444)TX IF GAIN ADJUSTMENT POINT(R1535) |
Related manuals for Icom IC-F8100
manualsdatabase
Your AI-powered manual search engine