346 DSC OPERATIONNew2001D Regular callThe nature of the dstress should be ncluded n the Dstress call.q Push [MENU] to enter the DSC menu, then rotate [SE-LECTOR] to select “Distress Call”, push [ENT].--DSC Menu--Select ItemIndividual Call ≤Group Call˘Distress CallReceived Call LogPosition RequestTest Call ≥ PushRotateSELECTORw Rotate [SELECTOR] to select the nature of the dstress,push [ENT].• ‘Undesgnated,’ ‘Fre, Exploson,’ ‘Floodng,’ ‘Collson,’ ‘Groundng,’‘Capszng,’ ‘Snkng,’ ‘Adrft,’ ‘Abandonng Shp,’ ‘Pracy (Pracy at-tack)’ and ‘Man Overboard’ are avalable.• The selected nature of the dstress s stored.• Push [CLR] to cancel and back to the prevous screen.--DSC Menu--Select Nature˘UndesignatedFire,ExplosionFloodingCollision ≥PushRotateSELECTOR˘UndesignatedFire,ExplosionFloodingCollisionGroundingCapsizingSinkingAdriftAbandoning ShipPiracyMan OverboardWhen the transcever receves the GPS data from theconnected GPS recever, the followng screens (steps eto t) do not appear. Go to step y at p. 36.e Input your lattude data drectly wth the keypad (f you want tochange the dsplayed data). After nputtng, push [ENT] to set.• If the data s not necessary to change, push [ENT] to skp thenput step.• Push [6• MNO ] to nput N; North lattude or [7• PRS ] to nputS; South lattude.• Rotate [SELECTOR] to move the cursor backward or forward.• Push [CE] to clear the poston and tme data. (p. 36)• Push [CLR] to cancel and back to the prevous screen.--DSC Menu--Input Latitude34°34.506NRotateSELECTOR--DSC Menu--Input Latitude25°25.506N1st digit blinksCursor movesPushorPushCLR* This illustration shows that the transceiver does not receivethe position data from the connected GPS receiver. If thetransceiver has no position data, ‘_’ (under bar) is indicated.--DSC Menu--Input Latitude25°25.415NSet ‘N’ (North) or‘S’ (South)Input your latitude dataPush