Icom IC-M25 Instruction Manual

Also see for IC-M25: Service manual Instruction manual Instruction manual

Icom IC-M25 Instruction Manual Manual pdf 34 page image

26ATIS CODE (For only the HOL and FRG versions)10The 10-digit ATIS code can be set and confirmed.Depending on the dealer setting:• The ATIS code setting may not be necessary.• The code can be set only one time.Setting the ATIS code❏ Turn OFF the power.qWhile holding downw [16/C], push [ ].• Enters to the ATIS Code Setting mode.Pushe [Y] or [Z] to select thenumber for the first digit of the ATIScode.Pushr [CH/WX] to select the nextdigit, and then push [Y] or [Z] toselect a number.• Pushing [VOL/SQL] selects theprevious digit.After the 10th digit has been input,tpush [Hi/Lo] to store the code.• The code number stops blinking.• Push [16/C] to return to the normaloperating mode.ATIS code confirmation❏ (Can be performed only when the ATIS code has been programmed.)Turn OFF the power.qWhile holding downw [16/C], push [ ] to enter the ATIScode confirmation mode.• The digit number and the stored code number appear.• Push [CH] to select the next digit, push [VOL/SQL] to selectthe previous digit.Pushe [16/C] to exit the ATIS Confirmation mode.First digit blinksSelected number blinksNext digit blinksEntered ATIS codePushto scroll