Icom IC-M412 Instruction Manual

Also see for IC-M412: Instruction manual

Contents

396DSC OPERATION12345678910111213141516D Receiving a Test callWhen a Test call is received:➥ “DSC” appears and “RCV TEST CALL” scrolls in the chan-nel comment display.➥ The beeps sound for 2 minutes.• Push [CLR] to stop the beeps.➥ Push [ENT] to reply to the call; push [CLR] to ignore thecall.ScrollsAppearsD Receiving a Test Acknowledgement callWhen a Test Acknowledgement call is received:➥ “DSC” appears and “RCV TEST ACK” scrolls in the chan-nel comment display.➥ The beeps sound for 2 minutes.• Push [CLR] to stop the beeps.➥ Push [ENT] to reply to the call; push [CLR] to ignore the call.ScrollsAppearsD Auto Switch functionBy regulation, after receiving a Distress call, the transceiverbasically switches the operating channel to Channel 16. How-ever, when this setting is set to “OFF,” the function enablesthe transceiver to remain on the operating channel even afterreceiving a Distress call.q Push [MENU] to enter the DSC menu.w Push [s] or [t] to select “AUTO SW,” then push [ENT].e Push [s] or [t] to select the Auto switch “ON” or “OFF.”• Push [CLR] to cancel and exit the setting, if desired.OFF : The transceiver remains on the operating channeleven after receiving a Distress call.ON : The transceiver automatically switches the operat-ing channel to Channel 16 after receiving a Dis-tress call. (default)r Push [ENT] to set and exit the setting.