2New2001PANEL DESCRIPTION2n Front panelFunction display (p. 4)Speaker i !0oweu y t rqq POWER • VOLUME CONTROL [VOL]➥ Rotate to turn the transceiver power ON or OFF.➥ Rotate to adjust the audio level.w SQUELCH CONTROL [SQL] (p. 7)Rotate to set the squelch threshold level.e DISTRESS KEY [DISTRESS] (p. 18)Hold down for 5 seconds to transmit a Distress call.r ENTER KEY [ENT]Push to set the DSC menu, a channel comment, etc.t CLEAR KEY [CLR]Push to cancel the entered function, or exits the Setmode.y SCAN • TAG CHANNEL KEY[SCAN] • [TAG](SCAN) (p. 11)➥ Push to start and stop the Normal or Priority scan.➥ Hold down for 1 second to set or clear the displayedchannel as a tag (scanned) channel.➥ While holding down [HI/LO] on the microphone, holddown this key for 3 seconds to set or clear all tag chan-nels in the selected channel group.u CHANNEL UP/DOWN • CHANNEL GROUP KEYS[s]/[t] • [U/I/C]➥ Push to select the operating channels, Set mode set-tings, DSC menu items, etc. (pp. 5, 6, 13, 41)➥ Hold down [Y] to continuously move upward throughthe operating channels.➥ Hold down [Z] to continuously move downwardthrough the operating channels➥ Push both keys to select one of three channel groupsin sequence. (p. 6)• USA, International and Canadian channels are selectable.➥ While holding down [SCAN], push [Y] or [Z] to adjustthe brightness of the LCD and key backlight. (p. 9)➥ While holding down both keys, turn ON the power toactivates the AquaQuake function. (p. 9)➥ During scan operation, Checks TAG channels, changesscanning direction or resumes the scan manually. (p. 11)