32PANEL DESCRIPTIONNew2001i CHANNEL 16/CALL CHANNEL KEY [16] • [9](16)➥ Push to select Channel 16. (p. 5)➥ Hold down for 1 second to select Call channel. (p. 5)• “CALL” appears when Call channel is selected.➥ When the Call channel is selected, hold down for 3 sec-onds to enter the Call channel programming mode. (p. 8)➥ While holding down [CH/WX], push to enter the chan-nel comment programming mode. (p. 8)➥ While in the channel comment programming mode,push to move the cursor backward. (p. 9)➥ While holding down this key, turn ON the power to enterthe Set mode. (p. 41)o CHANNEL/WEATHER CHANNEL KEY /DUALWATCH/TRI-WATCH KEY [CH/WX] • [DUAL](CH/WX)➥ Selects and toggles the regular channel and Weatherchannel when pushed momentarily. (pp. 5, 6)➥ Hold down for 1 second to start Dualwatch or Tri-watch.(p. 12)• Push to stop Dualwatch or Tri-watch when either is activated.➥ While in the channel comment programming mode,push to advance the cursor. (p. 9)!0 DSC MENU KEY [MENU] • [MMSI](MENU) (p. 13)➥ Push to turn the DSC menu ON or OFF.➥ Hold down for 1 second to display the MMSI code onthe channel comment indicator. (pp. 5, 6)n MicrophoneMicrophoneqewq PTT SWITCH [PTT]Hold down to transmit; release to receive. (p. 7)w CHANNEL UP/DOWN KEYS [Y]/[Z]➥ Push to select the operating channels, Set mode set-tings, DSC menu items, etc. (pp. 5, 6, 13, 41)➥ During scan operation, checks TAG channels, changesscanning direction or manually resumes the scan.(p. 11)e TRANSMIT POWER KEY [HI/LO]➥ Push to select the output power high or low. (p. 7)• Some channels are set to low power only.➥ While holding down this key, turn ON the power to tog-gle the Microphone Lock function ON or OFF. (p. 9)2