216DSC OPERATION6 Transmitting DSC callsDD Transmitting Individual callThe Individual call function allows you to transmit a DSC sig-nal to a specific ship only.q Push [[DSC/ENTDSC/ENT]] to enter the DSC menu.w Rotate [[ CHANNELCHANNEL ]] to select “Individual,” push[[DSC/ENTDSC/ENT]].e Rotate [[CHANNELCHANNEL]] to select the desired pre-programmedindividual address or “Manual Input,” push[[DSC/ENTDSC/ENT]].• The ID code for the Individual call can be set in advance. (p. 14)• When “Manual Input” is selected, set the 9-digit ID code(1st digit must not be ‘0’) for the individual you wish to call byusing [[CHANNELCHANNEL]].- Push [[CH/WXCH/WX]] or [[SCANSCAN]] for cursor movement.- After 9-digit is input, push [[DSC/ENTDSC/ENT]] to set the ID code.r Rotate [[CHANNELCHANNEL]] to select a desired intership channelor “Manual Input,” push [[DSC/ENTDSC/ENT]].• When “Manual Input” is selected, rotate [[ CHANNELCHANNEL ]] toselect the desired channel other than Channel 70, push[[DSC/ENTDSC/ENT]].t Push [[DSC/ENTDSC/ENT]] to transmit the Individual call.• If Channel 70 is busy, the transceiver stands by until the channelbecomes clear.To Call,To Cancel[other][DSC/ENT]IndividualTo Cancel[other]Ch70 is BUSYPush [DSC/ENT] to transmit DSC call.When Ch 70 is busy.Sel Channel69˘0877Sel AddressRickyManual Set˘Tom˘IndividualPOS InputGroupSel Item

OPERATING RULES

I Front panel

panel description 2

I Function display

PANEL DESCRIPTION........... 2

I Channel selection

basic operation

I Receiving and transmitting

I Call channel programming

BASIC OPERATION ............ 6

DUALWATCH/TRI-WATCH

I Scan types

I Setting tag channels

I MMSI code programming

dsc operation

I Position and Time programming

I Position/Time indication

I Distress call

I Transmitting DSC calls

I Receiving DSC calls

I Received messages

dsc set mode

I Intercom operation

I Microphone lock function

I Set mode programming

I Set mode items

set mode

I Supplied accessories

I Connections

I Mounting the transceiver

I Optional unit installation

I Dimensions

troubleshooting

CHANNEL LIST

SPECIFICATIONS AND 5

I Options

I Panel description

I Lock functions

I RF attenuator function

I Dualwatch/Tri-watch operation

I Starting a scan

I Channel comments

I HM-127 supplied accessories

I Installation

Icom IC-M502A Instruction Manual

IC-M502A