Icom IC-M502A Instruction Manual

Also see for IC-M502A: Instruction manual

Contents

Icom IC-M502A Instruction Manual Manual pdf 67 page image

6113HM-127 REMOTE-CONTROL MICROPHONE Starting a scanq While pushing [[ H/LH/L ]], push [[ CH/WXCH/WX ]] (( U/I/C)U/I/C) severaltimes to select the channel group (USA, INT, CAN), if de-sired.• When the Weather alert function is in use, select the desiredweather channel with [[CH/WXCH/WX]] and [[ YYYY]]/[[ ZZZZ]].w Push [[SCANSCAN]] to start Priority or Normal scan.• “SCAN” appears during Normal scan.• The priority channel readout indicates “16”, and “P” and “SCAN”indicators appear during Priority scan.• When a signal is received, scan pauses until the signal disap-pears or resumes after pausing 5 sec. according to the Set modesetting (Channel 16 is still monitored during Priority scan).• Push [[ YYYY]]/[[ ZZZZ]] to check the scanning tag channels, to change thescanning direction or resume the scan manually.e To stop the scan, push [[ SCANSCAN]] (( )).• “SCAN” disappears.• Pushing [[PTTPTT]], [[ ]] ((99)) or [[CH/WXCH/WX]] also stops the scan. Setting tag channelsq While pushing [[ H/LH/L ]], push [[ CH/WXCH/WX ]] (( U/I/C)U/I/C) severaltimes to select the channel group (USA, INT, CAN), if de-sired.w Push [[ YYYY]]/[[ ZZZZ]] to select the desired channel to set as a tagchannel.e Push [[SCANSCAN]] (( )) for 1 sec. to set the displayed channelas a tag channel.• “ ” appears.r To cancel the tag channel setting, push [[SCANSCAN]] (( )) for1 sec.• “ ” disappears.Convenient: Clearing (setting) all tagged channels➥ While pushing [[H/LH/L]], push [[SCANSCAN]] (( )) for 3 sec. (until along beep changes to 2 short beeps) to clear all tagchannels setting in the channel group.• Repeat above procedure to set all tag channels.TAGTAGTAGDW1616TAGDW13