Icom IC-M504A Instruction Manual

Also see for IC-M504A: Instruction manual Instruction manual

Contents

276DSC OPERATIONAbout Manual Inputting:Rotate [DIAL] to input the 8 digit group ID, then push[DIAL•ENTER].• Push [16•9] to move the cursor forward, or [CH/WX•DUAL•U/I/C] to move it backward.• Push [CLR] to cancel and return to the DSC Set up menu.• The first digit is specified as ‘0’ for a Group ID.• The first two digits are ‘0’ for any Coast station ID.--DSC Menu--Input AddressInput 8 digits0________˘Exit / ENT˘OK>e Rotate [DIAL] to select a desired intership channel, thenpush [DIAL•ENTER].• Intership channels are already preset into the transceiver in rec-ommended order.• After pushing [DIAL•ENTER], “Group Call Ready” is dis-played.--DSC Menu--Select Intership CH˘08697706˘Exit / ENT˘OK>--DSC Menu--Group Call Ready˘Exit / ENT˘OK>r Push [DIAL•ENTER] to transmit the Group Call.• Emergency channel (Channel 70) is automatically selected.• If Channel 70 is busy, the transceiver stands by until the channelbecomes clear.t After the Group Call has been transmitted, the followingmessage is displayed.--DSC Menu--Group CallTX Complete˘Exit>y Push [CLR] to exit, and the transceiver automatically se-lects the intership channel specified in step e.• Even if [CLR] hasn’t been pushed, the transceiver automaticallyselects the specified intership channel in step e after 2 secondof inactivity.12345678910111213141516