447 DSC OPERATIONTransmitting a Polling Request Reply callDTransmit a Polling Request Reply call when a Polling Requestcall is received.When the “POSITION ACK” in DSC Settings is set to ‘Auto’(p. 61), the transceiver automatically transmits a reply callwhen receiving a Polling Request call.Quick Reply:About Received call information:• Push [IGN] to ignore the call and return to the normal operatingmode.• Push [BACK] to return to the previous screen.• Push [ACK] to go to the next step.The Polling Request Replyeconfirmation screen is dis-played.Push [CALL] to transmit thereply call.• Push [EXIT] to return to thenormal operating mode.r While transmitting the replycall, the screen shown to theright is displayed, and thenreturns to the normal operat-ing mode.q When a Polling Request callis received, alarm soundsand the screen shown to theright is displayed.Push [ALARM OFF] to stopthe alarm.• Even if you do not push[ALARM OFF], the alarm stopsafter 2 minutes, and then thescreen in step w is displayed.w Push [ACK].• Push [IGN] to ignore the calland return to the normal oper-ating mode.• Push [INFO] to display the Poll-ing Request call information.
