Icom IC-M87 Instruction Manual
Also see for IC-M87: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                        | |
Contents
| 
13■ Scan typesScanning is an efficient way to locate signals quickly over awide frequency range. The transceiver has priority scan andnormal scan.In addition, an auto scan function is available for standby con-venience. (p. 18)Set the tag channels (scanned channel) before scanning.Clear the tag channels which inconveniently stop scanning,such as digital communications.Choose priority or normal scan in SET mode. (p. 18)NORMAL SCANCH 01 CH 02CH 88CH 05 CH 04CH 03Normal scan, like priority scan, searches through all tagchannels in sequence. However, unlike priority scan, Chan-nel 16 is not checked unless Channel 16 is set as a tagchannel.PRIORITY SCANCH 88CH 01CH 16CH 02CH 05 CH 04CH 03Priority scan searches through all tag channels in sequencewhile monitoring Channel 16. When a signal is detected onChannel 16, scan pauses until the signal disappears; whena signal is detected on a channel other than Channel 16,scan becomes dualwatch until the signal disappears.5 SCAN OPERATION |
Related manuals for Icom IC-M87
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine