Icom IC-M87 Instruction Manual

Also see for IC-M87: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Icom IC-M87 Instruction Manual Manual pdf 19 page image

■ Setting tag channelsFor more efficient scanning, add desired channels as tagchannels or clear tag channels for unwanted channels. Non-tag channels will be skipped during scanning. Tag channelscan be assigned to each channel group (INT, USA) indepen-dently.q Select the desired channel group (INT, USA) by pushing[DIAL] for 1 sec., if desired.w Select the desired channel to set as a tag channel.e Push both [Y] and [Z] for 1 sec. to set the displayed chan-nel as a tag channel.• “TAG” appears in the function display.r To cancel the tag channel setting, push both [Y] and [Z]for 1 sec.• “TAG” disappears.• Clearing all tag channels in the selected channel groupWhile pushing and holding both [Y] and [Z], turn power ONto clear all tag channels in the channel group.■ Starting a scanSet the priority scan function, scan resume timer and autoscan function in advance, using SET mode. (p. 18)q Select the desired channel group (INT, USA) by pushing[DIAL] for 1 sec., if desired.w Push [SCN•DUAL] to start priority or normal scan.• “SCAN” blinks in the function display.• “16” appears during priority scan.• When a signal is received, scan pauses until the signal disap-pears or resumes after pausing 5 sec. according to SET modesetting. (Channel 16 is still monitored during priority scan.)• Push [Y]/[Z] to check the scanning tag channels, to change thescanning direction or resume the scan manually.e To stop the scan, push [SCN•DUAL].• “SCAN” disappears.• Pushing [PTT], [16•C] or [DIAL] also stops the scan.Push Scan starts. Pushto stop the scan.Scan pauses when receivinga signal and audio is emitted.DUAL DUAL[Example]: Starting a normal scan.145SCAN OPERATION12345678910111213141516