Icom IC-M90 Instruction Manual

Also see for IC-M90: Instruction manual

135SCAN OPERATION5■ Setting tag channelsFor more efficient scanning, add desired channels as tagchannels or clear the tag for unwanted channels.Non-tag channels will be skipped during scanning.q Select the desired channel to set as a tag channel.w Push both [Y] and [Z] for 1 sec. to set the displayedchannel as a tag channel.• “ ” appears in the function display.e To cancel the tag channel setting, push both [Y] and [Z]for 1 sec.• “ ” disappears.✔ Clearing all tag channels in the selected channel groupWhile pushing and holding both [Y] and [Z], turn power ONto clear all tag channels in the channel group.■ Starting a scanSet the weather alert function, priority scan function, scanresume timer and auto scan function in advance, using theSET mode. (pgs. 17, 18)q Select the desired channel group (USA, CAN, INT) bypushing [CH/WX•U/I/C/L] for 1 sec. , if desired.• When the weather alert function is in use, select the desiredweather channel with [CH/WX•U/I/C/L] and [Y]/[Z].w Push [SCAN•DUAL] to start priority or normal scan.• “SCAN” blinks in the function display.• “16” appears on the sub channel readout during priority scan.• When a signal is received, scan pauses until the signal dis-appears or resumes after pausing 5 sec. according to scanresume timer setting. (Channel 16 is still monitored during prior-ity scan.)• Push [Y]/[Z] to check the scanning tag channels, change thescanning direction or resume the scan manually.e To stop the scan, push [SCAN•DUAL ].• “SCAN” disappears.• Pushing [PTT], [16•9] or [CH/WX•U/I/C/L] also stops the scan.[Example]: Starting a normal scan.Scan starts.Pushto stop the scanReceiving a signaland audio is emitted.for 1 sec.Push