Icom IC-R6 Service Manual
Also see for IC-R6: Price listInstruction manualInstruction manualInstruction manual
                                    | |
5 - 1¤ QUITTING ADJUSTMENT MODETurn the receiver’s power OFF.¤ ENTERING ADJUSTMENT MODE1) Connect the JIG cable (see the illust below) to the [SP] jack.2) Push and hold [FUNC], [BAND],and [Y], turn the receiver’s power ON.¤ KEY ASSIGNMENTS FOR THE ADJUSTMENT MODEEQUIPMENT GRADE AND RANGE EQUIPMENT GRADE AND RANGEJIG cable Modifi ed 3-conductor 3.5 (d) mm plug(See the illust below) Standard signalgenerator (SSG)Frequency range : 100 kHz to 1.2 GHzOutput level : –20 to +107 dBμ(–127 to 0 dBm)Frequency counterFrequency range : 0.1–300 MHzFrequency accuracy : ±0.1 ppm or betterInput level : Less than 1 mW¤ REQUIRED EQUIPMENTS5-1 PREPARATIONJIG cableTo [SP]3-conductor 3.5 (d) mm plug(CLONE)To [SP](GND)Adjust the value for the itemSelects next adjustment item(without storing the value)Selects previous adjustment item• Stores adjustment value• Starts automatic adjustmentAdjustment itemAdjustment frequencySECTION 5. ADJUSTMENT PROCEDURE• JIG CABLE |
Related manuals for Icom IC-R6
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine