Icom IC-R8600 Service Manual

Also see for IC-R8600: Instruction manual How-to guide Reference guide

5-8ADJUSTMENT ADJUSTMENT ITEM DISPLAY CONDITION OPERATIONVU12-flat(ATT 30dB)84 VU12 ATT 30dB flat (40 M) • Set the test equipment to:Frequency: 40.0215 MHzTouch [SET].(A beep sounds, and thenanother beeps sound 1seconds later.)85 VU12 ATT 30dB flat (65 M) • Set the test equipment to:Frequency: 65.0215 MHz86 VU12 ATT 30dB flat (105 M) • Set the test equipment to:Frequency: 105.0215 MHz87 VU12 ATT 30dB flat (165 M) • Set the test equipment to:Frequency: 165.0215 MHz88 VU12 ATT 30dB flat (260 M) • Set the test equipment to:Frequency: 260.0215 MHz89 VU12 ATT 30dB flat (410 M) • Set the test equipment to:Frequency: 410.0215 MHz90 VU12 ATT 30dB flat (625 M) • Set the test equipment to:Frequency: 625.0215 MHz91 VU12 ATT 30dB flat (925 M) • Set the test equipment to:Frequency: 925.0215 MHzVU3 TOTAL GAIN(Preamp OFF)92 VU3 Total Gain PRE OFF ref • Set the test equipment to:Frequency: 1260.0215 MHzModulation: NoneLevel: +60 dBμ† (–47 dBm)Touch [SET].(A beep sounds, and thenanother beeps soundafter the adjustment iscompleted.)93 VU3 Total Gain PRE OFF set • Set the test equipment level to:Level: OFFTouch [SET].(A beep sounds, and thenanother beeps sound 10seconds later.)VU3 TOTAL GAIN(Preamp ON)94 VU3 Total Gain PRE ON ref • Set the test equipment level to:Level: +60 dBμ† (–47 dBm)Touch [SET].(A beep sounds, and thenanother beeps soundafter the adjustment iscompleted.)95 VU3 Total Gain PRE ON set • Set the test equipment level to:Level: OFFTouch [SET].(A beep sounds, and thenanother beeps sound 10seconds later.)VU3 S-METER 96 VU3 S0 LEVEL • Set the test equipment to:Frequency: 1260.0215 MHzModulation: NoneLevel: 0 dBμ† (–107 dBm)Touch [SET].(A beep sounds, and thenanother beeps sound 1seconds later.)97 VU3 S9 LEVEL • Set the test equipment level to:Level: +34 dBμ† (–77 dBm)98 VU3 S9+60 LEVEL • Set the test equipment level to:Level: +94 dBμ† (–17 dBm)99 VU3 dBu –10dB • Set the test equipment level to:Level: –10 dBμ† (–117 dBm)100 VU3 dBu 0dB • Set the test equipment level to:Level: 0 dBμ† (–107 dBm)101 VU3 dBu 10dB • Set the test equipment level to:Level: +10 dBμ† (–97 dBm)102 VU3 dBu 20dB • Set the test equipment level to:Level: +20 dBμ† (–87 dBm)103 VU3 dBu 40dB • Set the test equipment level to:Level: +40 dBμ† (–67 dBm)104 VU3 dBu 60dB • Set the test equipment level to:Level: +60 dBμ† (–47 dBm)105 VU3 dBu 80dB • Set the test equipment level to:Level: +80 dBμ† (–27 dBm)5-4 VU RECEIVE ADJUSTMENT (CONTINUED)†: The output level of the standard signal generator (SSG) is indicated as the SSG’s open circuit.