Icom IC-V10MR Operating Manual

1221615141312111098765431BASIC OPERATION 2The beep function can be ON or OFF, and its level can beadjusted between 1 and 5, or 1 (linked) and 5 (linked). When aLinked option is selected, the beep level is adjustable by [VOL].Rotateq [VOL] to turn the transceiver power OFF.Setw [ROTARY SELECTOR] to any channel other thanChannel 16.While holding downe [Lower], rotate [VOL] to turn ON thepower and enter the beep level adjustment mode.Turn the beep function ON or OFF by pushingr [Lower].When a beep sounds after pushing [Lower], the beepfunction is ON. When no beep sounds after pushing [Low-er], the beep function is OFF.Pusht [Upper] to change the beep level. Repeatedly push-ing [Upper] first selects 1(lowest) to 5 (highest), and thenselects the lowest linked level, 1(Linked) to the highest, 5(Linked).• The adjustable range is 1 to 5 or 1 (Linked) to 5 (Linked).• If the level is set at 1 to 4, pushing [Upper] increases the level. If thelevel is at 5, pushing [Upper] selects the linked levels, starting with1 (Linked). If the level is at 1 (Linked) to 4 (Linked), pushing [Upper]increases the level. If the level is at 5 (Linked), pushing [Upper] re-turns the level to 1. Repeatedly pushing [Upper] repeats the cycle.• A beep sounds after pushing [Upper]. Therefore, you can de-termine the current level setting by the increasing loudness ofthe beep that sounds.• To determine if you have selected a linked level, set [VOL] tominimum, then push [Upper] up to 10 times, listening for theloudest beep (level 5). Pushing [Upper] once after the loudestbeep will select 1 (Linked). Repeatedly push [Upper] to selectthe desired linked level. You can easily hear a level you have setby repeatedly pushing [Lower].Rotatey [VOL] to turn the power OFF, then ON again to exitthe beep level adjustment mode.[ROTARY SELECTOR][VOL][Upper][Lower]254315 (Linked)4 (Linked)3 (Linked)2 (Linked)1 (Linked)Turn OFFthe Beepfunction[Upper]operation[Lower]operation■ Setting the Beep function and levelNOTE:This operation may not beselectable, depending onthe presetting. Ask yourdealer for details.