Icom IC-V85 Service Manual

Also see for IC-V85: Step-by-Step Programming Guide Instruction manual Service manual Instruction manual

This service manual describes the latest service informationfor the IC-V85, IC-V85E and IC-V85-T FM TRANSCEIVERSat the time of publication.NEVER connect the transceiver to an AC outlet or to a DCpower supply that uses more than 8 V. This will ruin thetransceiver.DO NOT expose the transceiver to rain, snow or any liquids.DO NOT reverse the polarities of the power supply whenconnecting the transceiver.DO NOT apply an RF signal of more than 20 dBm (100 mW) tothe antenna connector. This could damage the transceiver’sfront end.To upgrade quality, any electrical or mechanical parts andinternal circuits are subject to change without notice orobligation.MODEL VERSION SYMBOLIC-V85U.S.A. [USA][USA-2]Export[EXP][EXP-2][EXP-3]Taiwan [TPE][TPE-2]Korea [KOR]IC-V85E Europe [EUR][EUR-1]U.K. [UK]IC-V85-T Thailand [THA]Be sure to include the following four points when orderingreplacement parts:1. 10-digit Icom parts numbers2. Component part number and name3. Equipment model name and unit name4. Quantity required1110003491 S.IC TA31136FNG IC-V85 RF UNIT 5 pieces8820001210 Screw 2438 screw IC-V85 Top cover 10 piecesAddresses are provided on the inside back cover for yourconvenience.Icom, Icom Inc. and logo are registered trademarks of Icom Incorporated (Japan) in the United States, the UnitedKingdom, Germany, France, Spain, Russia and/or other countries.ORDERING PARTS1. Make sure a problem is internal before disassemblingthe transceiver.2. DO NOT open the transceiver until the transceiver isdisconnected from its power source.3. DO NOT force any of the variable components. Turnthem slowly and smoothly.4. DO NOT short any circuits or electronic parts. Aninsulated tuning tool MUST be used for all adjustments.5. DO NOT keep power ON for a long time when thetransceiver is defective.6. DO NOT transmit power into a signal generator or asweep generator.7. ALWAYS connect a 50 dB to 60 dB attenuator betweenthe transceiver and a deviation meter or spectrumanalyzer when using such test equipment.8. READ the instructions of test equipment thoroughlybefore connecting equipment to the transceiver.REPAIR NOTESINTRODUCTIONCAUTIONAll manuals and user guides at all-guides.com