Icom IC-V86 Advanced Manual

Contents

Icom IC-V86 Advanced Manual Manual pdf 17 page image

4 REPEATER AND DUPLEX OPERATION4-4The “Auto repeater” item in the Initial Set modeAuto Repeater function is OFF.Auto Repeater function is ON(For only duplex).Auto Repeater function is ON(For duplex and tone encoder).Auto Repeater function (For only the USA version)The USA version automatically activates the repeatersettings (DUP– or DUP+ and tone encoder ON/OFF),when the operating frequency falls within the generalrepeater output frequency range. It deactivates themwhen outside of the range.1. Hold down [ ] for 1 second to turn OFF thepower.2. While holding down [Y] and [Z], turn ON thepower to enter the Initial Set mode.3. Push [Y] or [Z] to select the Auto Repeater item(RPt).4. Rotate [VOL] to set the Auto Repeater function to“R1,” “R2” or “OF.”• “RPt.OF”: The Auto Repeater function is OFF.• “RPt.R1”: The Auto Repeater function is ON(For only duplex).• “RPt.R2”: The Auto Repeater function is ON(For duplex and tone encoder).5. Push [# ENT] to exit the Initial Set mode.Frequency range and offset directionFrequency range Duplex direction145.200–145.495 MHz146.610–146.995 MHz “–” is displayed.147.000–147.395 MHz “+” is displayed.