Icom IC-V86 Advanced Manual

Contents

Icom IC-V86 Advanced Manual Manual pdf 25 page image

6 SCAN OPERATION6-2A scan automatically searches for signals, and makes it easier to locate new stations for contact or listeningpurposes.BAND EDGE TO BAND EDGE SCAN (FULL SCAN)Bandedge BandedgeScanJumpPROGRAMMED SCAN*Bandedge Bandedge1A2A3A1b2b3bScan edgesScanJumpThe Programmed scan P1 scans between 1A and1b, P2 scans between 2A and 2b, and P3 scansbetween 3A and 3b frequencies.MEMORY/CALL CHANNEL WATCH5 secondsVFOfrequencyMemory(Call)channelMEMORY SCAN WATCHVFOfrequencySKIPMch 0Mch 1Mch 2Mch 1995 secondsSKIP SKIPMch 1Mch 0Mch 2 Mch 3 Mch 4 Mch 5Mch 10Mch 199 Mch 9 Mch 8 Mch 7Mch 6The band edge to band edge scan repeatedly scansthrough the operating band.1. Push [VFO/MR/CALL] several times to select theVFO mode.2. Push [FUNC], and then push [SCAN] to start thescan.3. During the scan, push [FUNC], and then push[SET] several times to select “AL” (band edge toband edge scan), if necessary.L “P1,” “P2” and “P3” for Programmed scan.L To change the scan direction, push [Y] or [Z].4. To cancel the scan, push any key except [ ], [Y]/[Z], [MONI] or [FUNC].Example: Starting the band edge to band edgescan.Push , and then push .If necessary, pushto select the scan type “AL.”several times, and then pushPush several times.(VFO mode)(A scan starts)Scan typesBand edge to band edge scan (Full scan)* See the BASIC MANUAL for details.D VFO scanD Priority watch*D Memory scan*