Icom MarineComander MXS-5000 Instruction Manual

Icom MarineComander MXS-5000 Instruction Manual Manual pdf 18 page image

22-2PLOTTER OPERATIONPlotter display■qwerq CURSOR POSITIONShows the pointed position* of the cross hair cur-➥sor in latitude/longitude, the bearing and distanceof the pointed position relative to the current ves-sel position.* Depending on the presetting, Loran-C Time differ-ences is displayed instead of the position data.Placing the cursor directly over the center of the➥object icon shows the object’s position informa-tion.w YOUR VESSEL ICONIndicates the current vessel’s position. The Icon rep-resents the current position of your vessel.• The vessel icon points to the bow.• When no heading information is received, the vesselicon points to the COG (Course Over Ground).• When both the heading and COG information are re-ceived, the vessel icon is displayed as “Ô.”e NAVIGATION SCREENAppears only when the Navigation function is ON.It shows the destination information.r PLOTTER DISPLAY INFORMATIONShows the selected plotter display mode, displayscale, radar overlay status and an arrow which indi-cates the north.• The selected plotter display mode icon (e.g. “ ”) isturned ON when it is enabled. (p. 2-5)• When the cross hair cursor points to the plotter displaymode icon, push [SUB] to switch the mode between “N-UP” (North-up). “C-UP” (Course-up), “AC-UP” (Automat-ic Course-up), “TM” (True Motion) and “AR” (AutomaticRange).• When the cross hair cursor points to the radar overlayicon (“ ”), push [SUB] to turn the Radar Overlay func-tion ON or OFF. (The Radar Overlay function can beturned ON only when the radar unit is in the transmitstatus.)