Icom iF3200DEX series Operating Instructions Manual

Contents

3 BASIC OPERATION3-7Setting the Beep functionThe Beep function can be turned ON or OFF. When it isOFF, the channel announcement is also turned OFF.NOTE: You must turn ON the Beep function whenyou set the microphone gain or the squelch level tocheck the current level setting with the beep sound-ing. (pp. 3-10, 3-11)Rotate [VOL] to turn OFF the transceiver power.qSet [ROTARY SELECTOR] to any channel otherwthan Channel 16.While holding down [Lower], rotate [VOL] to turn ONethe power to enter the Beep level adjustment mode.Push [Lower] to turn the Beep function ON or OFF.r• When a beep sounds after pushing [Lower], the Beepfunction is ON. When no beep sounds after pushing[Lower], the Beep function is OFF.• If desired, push [Upper] to adjust the Beep level. Seepage 3-8 for details.Rotate [VOL] to turn OFF the power to exit the Beeptlevel adjustment mode.NOTE: This operation may not be available, depend-ing on the presetting.[ROTARY SELECTOR][VOL][Lower][Upper]