Icom iF3200DEX series Operating Instructions Manual

Contents

3 BASIC OPERATION3-11Setting the squelch levelThe squelch circuit mutes the received audio signal,depending on the signal strength.Rotate [VOL] to turn OFF the transceiver power.qSet [ROTARY SELECTOR] to any channel otherwthan Channel 16.While holding down [Upper], rotate [VOL] to turn ONethe power and enter the squelch level adjustmentmode.Push [Upper] to increase the squelch level (tightrsquelch), or push [Lower] to decrease the squelchlevel (loose squelch).• The adjustable range is 0 (loose squelch) to 9 (tightsquelch).• A beep sounds after pushing [Upper] or [Lower]. An errorbeep sounds if you try to exceed the adjustable range.NOTE: The Beep function should be turned ON. (p. 3-7)Rotate [VOL] to turn OFF the power to exit thetsquelch level adjustment mode.NOTE: This operation may not be available, depend-ing on the presetting.[ROTARY SELECTOR][VOL][Lower][Upper]