Icom ic-F3262DT Instruction Manual

Also see for IC-F3262DS: Instruction manual Operating guide

Icom ic-F3262DT Instruction Manual Manual pdf 19 page image

143BASIC OPERATIONChannel selection■Several types of channel selections are available. Methodsmay differ, depending on the presetting.NON-ZONE TYPE:To select the desired operating channel:• Push [CH Up] or [CH Down].• Rotate [ROTARY SELECTOR]*.- Up to 16 preprogrammed channels can be selected.• Push one of [MR-CH 1] to [MR-CH 4].ZONE TYPE:To select the desired zone:• Push [Zone], then push [CH Up] or [CH Down].• Push [Zone Up] or [Zone Down].• Rotate [ROTARY SELECTOR]*.- Up to 16 preprogrammed zones can be selected.* Depending on the presetting.When [ROTARY SELECTOR] selects “Operating channel,” [CH Up]/[CH Down] are disabled.When [ROTARY SELECTOR] selects “Operating zone,” [Zone] or[Zone Up]/[Zone Down] are disabled.To select the desired zone using the 10-keypad:• Push [Zone], then push keys on the 10-keypad to input thedesired zone number. After inputting, the zone is selected.To select a single figure zone, input ‘00’ before the zonenumber. To select a double figure zone, input ‘0’ before thezone number.CALL SHFTdPMR ZONEZONE00_CALL SHFTdPMR ZONEDigitalCALL SHFTdPMR ZONEChannel 1002 ch-01CALL SHFTdPMR ZONEChannel 1001 ch-01Push [Zone]. Zone text is displayed.Input ‘002’ with 10-keypad.Zone 2 is selected.[Example]To selectZone 2AUTOMATIC SCAN TYPE:Channel setting is not necessary for this type. When you turnON power, the transceiver automatically starts scanning.Scanning stops when a call is received.Voting operationD (for zone selection)The transceiver automatically starts scanning when a zone,specified for the voting operation, is selected.The voting scan detects the signal of the repeater and auto-matically selects the strongest station.12345678910111213141516