Icom ic-U80 Instruction Manual

Also see for IC-U80: Instruction manual Quick guide

52PANEL DESCRIPTION12345678910111213141516171819[3] • [T.SCAN](3)➥ Numeric input and sends DTMF code: ‘3’➥ After pushing [FUNC](M), starts a tone scan. (p.35)[4] • [DUP](4)➥ Numeric input and sends DTMF code: ‘4’➥ After pushing [FUNC](M), selects minus duplex,plus duplex, or simplex operation. (p. 22)[5] • [SCAN](5)➥ Numeric input and sends DTMF code: ‘5’➥ After pushing [FUNC](M), starts a scan. (pp. 30,31)[6] • [SKIP](6)➥ Numeric input and sends DTMF code: ‘6’➥ After pushing [FUNC](M), sets or cancels theMemory Skip scan setting. (p. 31)[7] • [PRIO](7)➥ Numeric input and sends DTMF code: ‘7’➥ After pushing [FUNC](M), starts the Priority watch.(p. 32)[8] • [SET](8)➥ Numeric input and sends DTMF code: ‘8’➥ After pushing [FUNC](M), enters the Set mode.(p. 39)[9] • [H/M/L](9)➥ Numeric input and sends DTMF code: ‘9’➥ After pushing [FUNC](M), sets the output powerto High, Mid or Low. (p. 19)[0] • [DTMF-M](0)➥ Numeric input and sends DTMF code: ‘0’➥ After pushing [FUNC](M), enters the DTMF mem-ory mode. (p. 36)[M] • [FUNC](M)➥ Sends DTMF code: ‘M (indication: E)’➥ Push to access the second function of otherkeys.[# ENT] • [ ](ENT)➥ Sends DTMF code: ‘# (indication: F)’➥ After entering a frequency, stores it. (p. 17)➥ Push to exit the Set mode or Initial Set mode. (pp.39, 44)➥ After pushing [FUNC](M), hold down for 1 secondto turn the Key Lock function ON or OFF (p. 18)