9 BATTERY CHARGING■ Optional battery chargersD AD-100 installationThe AD-100 charger adapter must be installed into the BC-119N or BC-121N before battery charging.Connect the AD-100 charger adapter and the BC-119N/BC-121N as shown below, then install the AD-100 into the holderspace of the BC-119N or BC-121N with the supplied screws.Screws suppliedwith the chargeradapterConnectorsSocketsAD-100This illustration isdescribed with theBC-119N.D Rapid charging with the BC-119N+AD-100The optional BC-119N provides rapid charging of batterypacks.The following items are additionally required.• AD-100 charger adapter• A power adapter (may be supplied with BC-119N depend-ing on version) or the DC power cable (OPC-515L/CP-23L).Power adapter(A different type, or nopower adapter is supplied,depending on the version.)AD-100 chargeradapter is installedin the BC-119N.About OPC-515LWhite line: Black line :*Optional OPC-515L*(for power source)or CP-23L (for 12 Vcigarette lighter socket)can be used instead ofthe power adapter.Battery packTransceiverTurn OFF the power26